• <menu id="4weu6"></menu>
  • LOGIN
    User Name:
    PassWord:
    Code:
    *Register  
    PRODUCTS
    CONTACT US

    Technical support : Zhang Gong

    Mob:13652406579

    QQ:346389600
    Tel:0755-28571556
    Fax:0755-28571010

    E-mailgocoant@163.com

    Salesman:Angel

    Mob : 13640927089

    Mob : 13632674386

    Add:1503, Building D , Huilongda Industrial Area, Shilongzai, Shiyan Street In Baoan District, Shenzhen, China
      Products
    Name: Mobile phone hard press tester GC-212
    Type: Mechanical durability reliability test series
    Item: GC-212
    Introduction:

    First, an overview

    This instrument can simulate mobile phone and other products, imitate the repeated seat pressure life test, take certain hardness aluminium rod as pressure head, drive by cylinder, adjust a certain pressure of 17kg, measure the degree of damage after reaching the number of times. Meet YD/T 1539-2006 standard. The mobile handset is unpacked and equipped with matching batteries to turn on and lock the keyboard face up. The fuselage and the fixing bracket are vertically placed in the axial direction of the round bar aluminum extrusion head with a length of 12 cm. The sample is extruded 1000 times per minute at a frequency of 15-30 times per minute. The function, appearance and assembly shall be in accordance with the relevant requirements. Standard requirements. A folding, sliding and rotating handheld machine should be tested under its closing condition.

    Two, technical parameters

    1. test maximum sample: 200cm*10cm, adjustable in height 4cm.

    2. use electric control.

    3. working frequency: 10~60 times / min.

    4. calibration device, pressure sensor 100kg

    5. alarm time: 5-10 seconds (fixed)

    6. pressure head requirements: the use of round bar aluminum

    7. machine size: about 650*430*500mm

    8. weight: 40kg

    9. power supply: AC220/50HZ

    Back
    Shenzhen Gaochuang Detection Equipment Co.,Ltd 粤icp备18151338号
    365bet官网